Switch Reversing   (EE - 596)

Rotary brush type, current rating 10A mounted on moulded .bakelite base plate with 4mm socket terminals.

Switch Tumbler   (EE - 597)

For screw surface mounting, current Rating 5A, size 50mm dia

Bell Push, Moulded plastic body   (EE - 598)

Same as above, small size   (EE - 598/1)

Same as above, push button type   (EE - 598/2)

Switch Toggle   (EE - 599)

Single pole, ON/OFF, moulded plastic body, Max current 5Amp, 220V AC, Two way

Same as above, but one way EE - 599/1

Switch Rocker   (EE - 600)

Black moulded with red/green neon light

Insulated Socket Terminals   (EE - 601)

With moulded captive head, 4mm socket, nuts and washers. The screw top will connect ordinary connecting wires and spade terminals.

a) Black
b) Red Spade

Terminal Adapters   (EE - 602)

Standard type of spade, with an insulator, 4mm socket connector.

a) Black
b) Red

Socket for Banana Plug, 4mm   (EE - 603)

Moulded hard body, threaded with fixing nut. Plated brass insert with solder pin. Require 8mm dia panel hole, maximum panel thickness 5mm.

a) Black
b) Red
c) Yellow
d) green

Crocodile Clip   (EE - 604)

Spring loaded serrated jaws, clamping screw for wire, wires may also be soldered. Insulated 4mm sockets.

a) Black
b) Red

Miniature Crocodile Clip   (EE - 605)

a) Black
b) Red

Banana Plug   (EE - 606)

4mm pins, 18mm long spring insert and hard plastic body.

a) Black
b) Red

Plug Connectors   (EE - 607)

Suitable for 4mm balance plugs.

a) Black
b) Red

Plugs with Transverse Hole   (EE - 608)

Suitable for 4mm Banana plugs.

a) Black
b) Red