Barometer Aneroid, Demonstration   (MC-1258)

Demonstration type, fully enclosed in a transparent synthetic case for demonstration. 100 mm coated dial reads from 28 to 32 inches and 950 to 1040 millibars, air tight sealed all around, pressure rubber bulb provided to force the movements, for educative demonstration.

Hygrometer Wet and Dry Bulb   (MC-1259)

Comprising two -10 to - 50° C x 1° C thermometers fitted on scale. One thermometer bulb is covered with muslin which kept moistened being connected to a water reservoir. Mounted in a case with hinged cover. Supplied complete with relative humidity table.

Hygrometer Wet and Dry Bulb   (MC-1260)

Same as but on wooden base.

Hygrometer Wet and Dry Bulb   (MC-1261)

Same as but in plastic case

Hygrometer, Whirling   (MC-1262)

This is a ventilated type hygrometer. It is particularly useful for measuring local differences in humidity. It comprises two thermometers - 5 to 50° C. Mounted in a wooden/plastic body. One thermometer has a wick dipped into water reservoir. Supplied complete with humidity chart, and carrying case.

Dial Hygrometer   (MC-1263)

Encased in metal case, anodised scale 100 x 1 %

Dia (a) 85mm (b) 100mm

Hygrometer Regnault, Single Type   (MC-1264)

To determine dew point temperature. It comprises of a glass tube 150x25 mm with chromium plated metal thimble cemented to the base. It is fitted with a rubber bung carrying two right angled glass tubes for air inlet and outlet and a thermometer.

Hygrometer Regnault, Double Type   (MC-1265)

Two glass tubes 150 x 25mm each with side arm and a chrome plated metal thimble cemented to base are fitted with a rubber bung carrying a thermometer 0-50° x 0.5°C. One tube also has a right angled glass tube for air inlet. Tubes mounted on a stand with tripod base.

Rain Gauge, Direct Reading   (MC-1266)

Single piece, made of clear plastic, dual scale to measure rain upto 120mm x 0.2mm and 5 inches x 0.1 inch division, can be mounted on a post.

Rain Gauge, Metal   (MC-1267)

Comprising a metal funnel 125 mm diameter Overall length 250 mm with an inner receiving cylinder 220 x 70 mm (Length x dia) a cylindrical outer body length 300 x 125 mm diameter and a glass measuring j'ar graduated 0 to 10 mm x 0.1 mm (100 divisions)

Rain Gauge, Symon's   (MC-1268)

It consists of a cylinder made from iron sheet with brass collar which fits into the top and drains into an inner cylinder. When the inner cylinder fills the vessel collects the overflow. Complete with glass measure.

Rain Gauge/Recorder   (MC-1269)

This is a spring balance type self recording rain gauge. It consists of a nickled brass receiver placed over the sensitive dial pattern machine which records the rain fall. The rain fall up to 100 mm (Approx) can be recorded with this type of rain gauge recorder.

Thermometer, Maximum and Minimum   (MC-1270)

Six, Dual scale thermometer, spirit in glass thermometer with indicating thread mercury and two cursors, mounted on dual scale - 20°C to + 50°C x 1°C and - 20° F to 120° x 2°F, metal case, with magnet.

  (MC-1271)

Same as but in plastic case

Thermometer, Maximum and Minimum   (MC-1272)

Same as but on wooden base plate, plastic scale.