Balance Counter   (MC-1042)

Body made of cast iron and Two removable pans are die pressed, chrome plated.
Capacity (a) 2kg (b) 5kg (c) 10kg

Electronic Balance   (MC-1043)

Based on E.M.F.C. Technology, LED display - Standard bidirectional RS 232C interface; selected baud rate - Easy operation with feather touch membrane keys - Automatic zero tracking - Port for external display - Stainless steel weighing pan -Multiple weighing units : Grams & Carat - Polyfunction : counting parts, ±weighing, percentage weighing, accumulation of weights in memory - Taring Range (Subtractive) : Up to full capacity -Response time (Approx): 5 to 8 sees - Power requirements : 230V AC + 10% -15%, 50 Hz - operation temperature range : 10°c to 45°c.

* The balance is supplied with Breeze shield as standard, for other models Breeze shield can be supplied on request.
* All Specifications are subject to change for improvement without notice.
* Higher ranges balances are also available.

Electronic Balance Digital   (MC-1044)

Auto shut off, auto zero tracking, LCD display, battery & mains operated.

Note: Specifications/designs are subject to change.

Scale, Wooden   (MC-1045)

Made of seasoned hard wood, both edges divided into cm & mm. Figure marked at every cm.

(a) One meter figure marked vertically.
(b) Half meter figure marked vertically.
(c) One meter figure marked horizontally.
(d) Half meter figure marked horizontally.
(e) One meter, zero at the centre 50-0-50cms
(f) Half meter, zero at the centre 25-0-25cms

Scales, Plastic   (MC-1046)

Made of plastic both edges divided into cms and mms Figure marked at every cm. or divided cms & Inches.
Lengths
(a) 15 cm (6"); (b) 30 cm (12");
(c) 60 cm (24"); (d) 100 cm (36")

Scales, Metal   (MC-1047)

Marked in cms. and Inches
Length
(a) 15 cm (6"); (b) 30 cm (12");
(c) 60 cm (24"); (d) 100 cm (36")

Measuring Tape   (MC-1048)

Steel tape measure, 9.5 mm wide made of tempered or high carbon steel blade phosphated to stand corrosion and rust. In case (case covered with vinyl leatherette) fitted with flush winding handle, metric in mm,

"(a) 10m (b) 15m (c) 20m (d) 30m (e) 50m.

Measuring Tape   (MC-1049)

Same as P-l 165 but width 13 mm.
(a) 10m (b) 15m (c) 20m (d) 30m

Fibre Glass, Measuring Tape   (MC-1050)

Made from fibre glass with PVC covering, non-conducting, water proof, washable, non-creasing and wear-resistant tape, case covered with vinyl leatherette fitted with flush winding handle.

(a) 5m (b) 7.5m (c) 10m (d) 15m (e) 20m (f) 25m (g) 30m

Steel Tapes   (MC-1051)

Pocket type 3 meter length. Plastic or metal case, steel blades, Width

(a) 6mm (b) 10mm (c) 13mm

Trundle Wheel   (MC-1052)

With detachable handle, one meter circumfrence, figured at every 5cms.

Opisometer   (MC-1053)

For measuring the length of curved lines, comprising a knurled wheel, runs on a transversely mounted threaded spindle.

Vernier Calliper   (MC-1054)

Nickel plated steel with dual scale 12 cm x 0.1 mm and 0- 5x0.05 inches, beveled cross horns for internal measurements, with adjustment thumb roller, locking screw and depth Gauge. Supplied in cardboard case.

Vernier Caliper   (MC-1055)

Precision, nickel plated steel with dual scale 15 cm x 0,1 mm and 6 x 1/128 inches, with thumb movement for easy motion of jaws, in velvet lined case or plastic case

Vernier Caliper, Plastic   (MC-1056)

Dual scale, 15cm and 6inch with vernier