Vernier Demonstration, 1 meter   (MC-1057)

Made of wood, for Internal and External measurements of objects upto 1 meter in size, figured every centimeter, calibrated in half centimeters, reading taken directly via the window in the adjustable caliper arm, length 1.1 meter (approx)

Vernier Demonstration, 300mm   (MC-1058)

Wooden, with sliding vernier, reading 300mm x 0.1mm and 12 Inches to 0.01 Inches

Micrometer Screw Gauge   (MC-1059)

Made of Nickel plated brass, stainless steel screw with ratchet stop 25 x 0.01 mm without lever lock in protective case.

Micrometer Screw Gauge   (MC-1060)

Same as P-1210, but with lever lock

Micrometer Screw Gauge   (MC-1061)

Same as P-1210, but with oxidised steel screw, instead of S.S. screws
Range (a) 0-10 x 0.01mm (b) 0-20 x 0.01mm (c) 0-25 x 0.01mm

Micrometer Screw Gauge   (MC-1062)

Same as P-1211, but with oxidised steel screw and with lever lock.

Range : (a) 0-10 x 0.01mm (b) 0-20 x 0.01mm (c) 0-25 x 0.01mm

Micrometer Dial Gauge   (MC-1063)

Precision measurements, Range 0-10mm least count 0.01mm, with lug back and knurled adjustable zero setting knob.

Dial Gauge   (MC-1064)

50 mm dial, range 0-25 x 0.01 mm.

Spherometer   (MC-1065)

With brass dial head 40 mm dia, divided in 100 Div. resting vertical scale 10-0-10mm. Frame with three accurately positioned steel legs. Separation approx. 40 mm

(a) Screw Pitch 1mm, reading 0.01mm (b) Screw Pitch 0.5mm, reading 0.005 mm

Spherometer   (MC-1066)

Same as double disc type, heavy pattern

(a) Screw Pitch 1mm, reading 0.01mm (b) Screw Pitch 0.5mm, reading 0.005 mm

Spherometer   (MC-1067)

Same as but with screw & legs are made from stainless steel.

(a) Screw Pitch 1mm, reading 0.01mm
(b) Screw Pitch 0.5mm, reading 0.005 mm

Circular Caliper (Caliper Gauge)   (MC-1068)

Steel for internal and external gauging.

Bow Calipers   (MC-1069)

For measurements of circular and spherical objects upto 360 mm across where a straight measurement is not possible.

Calipers, Spring Type   (MC-1070)

Suitable for the measurements of diameter of spherical objects. Made of steel, with pivoted spring, integral knurled knob for the measurement of diameter upto 150mm
(a) Out side measurements
(b) Inside measurements

Feeler Gauges   (MC-1071)

It is to measure space between two surfaces using a single gauge or combination of gauges. Set of gauges assembled together.