Anemometer With Energy Integrator  

This anemometer has several features for easy measurements and easy integration and estimation of wind energy over long required durations.

Features
1. Small and compact wind velocity cups - 3 different types with orbital diameters 20 cms, 12 cms and 55 cms. Made for different applications.
2. Electro-optic sensor does not make, wear and tear and change in performance.
3. Small wind direction sensor.
4. Remote operated sensors with their cable lengths extendable upto several hundreds of meters.

Specifications

Other Models Available

Anemometer with wind velocity alone  

Anemometer with both velocity and direction  

Multichannel anemometer  

Multichannel anemometer system consisting of several sensors and a single meter with or without integrators.

Set of Masses   (MC-1001)

Made of chrome plated brass. This set includes Nine slotted masses each of 10 g with a 10 g wire hanger making total mass of 100 g, masses do not fall off when assembled in a set. Tolerance ± 3%.

Set of Masses   (MC-1002)

Same as above, but made of Steel

Set of Masses   (MC-1003)

Similar to but includes Nine slotted masses of 100 g each and one hanger of 100 g making a total of 1000 g or 1kg. Tolerance ± 3%.

Set of Masses   (MC-1004)

Same as above, but made of Steel

Set of Masses   (MC-1005)

Similar to set is made up of one 20 g hanger, three slotted masses of 20 g each, one slotted mass of 10 g and 2 slotted masses of 5g each, total 100 g Tolerance ± 1%.

Set of Masses   (MC-1006)

Same as above, but made of Steel

Set of Masses   (MC-1007)

Similar to but made up of one 50 g hanger, nine slotted masses of 20 g each, one of 10 g and two of 5 g each, making a total of 250g tolerance ± 1%.

Set of Masses   (MC-1008)

Same as above, made of Steel

Individual Masses / Hangers   (MC-1009)

For use in sets and can be assembled depending on customers requirement.

Hangers : (a) 100 g (b) 50 g (c) 20 g (d) 10 g
Masses : (e) 100 g (f) 50 g (g) 20 g (h) 10 g (i) 5 g

Individual Masses / Hangers   (MC-1010)

Same as above, but made of Steel

Slotted Masses, Iron   (MC-1011)

Used for sonometer experiments & Other general applications where bigger loads are required. It is made up of one carrier hanger of 1kg and four slotted masses each of 1kg making a total load of 5 kg.