OVERHEAD PROJECTOER

Projects bright and sharp image from handwritten illustrations, graphs, pictures and diagrams on transparent materials.

Uniform illuminations even at highly elevated positions of the image.

Without need for dimming lights.

Writingstage of 250mm x 250mm to suit all standard transparencies.

Best optics and rigid quality control.

Suitable for nay projection distance from 1.3 to 3 meters, therefore well suited even for small rooms and conference rooms.

Continuous writing form top to botom or left to right on 10 meters long cell ophaneroll.

Indigenous projection lamp with logest life, easy availability, low voltage, high intensity 24 Volts, 250 Watts, Halogen lamp, working through high quality transformer.

Cooling system to projector overheating self lubrication type motor, the stage temperature is maintained at 45°C approx.

Thermocol packing for safety during transportation and idle time.

SPECIFICATIONS
Projection lens : One element 254mm, Condenser systemm : Fresbnel condenser, Projection lamp : 250W, 24V, Halogen lamp, Power source : AC 220-240V, 50Hz, Stage aperture : 250mm x 250mm, Focussing: Fine focussing with rack and pinion mechainsm, Cooling system : Blower cooled, Lamp Safety : Solid state electronic control for light intensity variations, Dimensions : 310 mm (W) x 310mm (D) x210mm(H)

SUPPLIED WITH :
Writing pack- consisting of 6 grease pencils. *Cellophance roll 10 mtrs or A-4 size plain transparency 30nos., 2 nos. glass fuse, * Cleaning cloth 1 no. * Dust cover. packed with thermocole in sturdy cardboard box.

MODEL S-100 B
With twin lamps for failure-free presentation : Two lamps have been installed so that if one bulb fuses at any time, a turn of the knob will light the second bulb within 2 seconds. Any interuption during the presentation is illiminated.

MODEL S-100 B
Overhead Prohjector with fresnellens A-4 size 285mm x 285mm also available with twin lamp.

OPTIONAL ACCESSORIES
Mounted transparency sheets, Map type projection screen in carrying case ( 152 cms x 152 cms ) Projectionscreen with tripod stand (135 cms x 172 cms)
 




Over Head Projector

 

PLATINUM RESISTANCE THERMOMETER

Enclosed in pyrex glass tube or aluminium tube of approximately 30 cms long & 2 cms diameter.  A fine platinum wire is wound on the mica.  Its resistance is approximately 2.8 ohms.  Two compensatory leads are connected to four terminals on a square block.  The terminals are marked CL and PL to represent compensating and platinum leads.
.

Platinum Resistance Thermometer

 

RESISTANCE COILS

The series of Resistance Coils, Standard Resistance Boxes.  Post Office Boxes manufactured by us meet the requirement in accuracy and rigidity of the practical classes.  The coils are non-inductively wound on bakelite spools.  The resistance wires used are of the best quality with a low temperature coefficient.  They are through varnish, insulated and dried.  All the coils are used after proper againing and made impervious to moisture effects.  All the coils are calibrated on imported Testing Bridge W.G.Pye  & Co., England.

Resistance Coils

BACK  |  NEXT

HOME    |     ABOUT US     |      PRODUCTS     |     CONTACT US

Copyright Starlac Scientific House - All Rights Reserved